BLACK BEAR Waterproofing Cement Additive

Product description

BLACK BEAR Waterproofing Cement Additive is a powdered waterproofing admixture used in cementitious materials to reduce water permeability and absorption. It is appropriate for the surface of roofs or walls where the waterproofing properties need to be improved.

 

Typical Properties

Base Tire crumb rubber
Appearance Gray
Form Fine powder
Bulk density 0.30 – 0.50 g/ml
Solubility in water Insoluble

 

Features/ Benefits:

  • Enhancements to the waterproof properties of mortar.
  • Easy-to-use and good to use.
  • Make mortar waterproofing and breathable.
  • Structurally integral protection
  • Extend the lifetime of exterior paint.
  • Excellent bond to the concrete substrate.

 

Application

BLACK BEAR is ideal for use in Portland cement/sand matrix. It is suitable for the surfaces where the waterproofing properties need to be improved. For example:

  • Concrete substrate: rooftops or exterior walls.
  • Brick walls.
  • Corner chamfers.

50kg of cement + 150kg of sand + 1 Bag (2kg) of Black Bear is sufficient to apply to an area of 4 m2 with 3cm thickness.

 

Dosage

For mortars: the recommended addition is 4wt% of cement. The mixing ratio of cement and sand is recommended to 1:2 or 1:3 by weight. The water content is varied based on consistency required.

 

Procedure

Must clean the surface and remove any dust, contaminated material, plaster, or organic waterproofing membrane before use. Cementitious adhesive should be used to increase the adhesive strength between the surface and newly waterproofing mortar. Fresh Portland cement, sand and Black Bear must be mixed firstly. Then, water in the appropriate amount is added into the dry mixture. All ingredients are blended until it reaches the right consistency. To ensure quality, please follow the instruction when preparing and do not use other chemical admixtures. It is recommended that the newly applied mortar can be kept wet with water in the first few days for curing.

 

Precaution

BLACK BEAR is non-toxic. Use with proper ventilation. To avoid breathing dust, please wear a dust mask, long sleeves and eye goggles during the operation. If contact with skin occurs, wash with water and soap. In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

 

Packaging & Storage

BLACK BEAR is supplied in 2KG per bag. Black Bear should be stored dry at ambient temperature. The shelf life of 12 months from date of production if stored properly in original unopened packs.

 

Technical Data

 

Time of setting

Test item Result
Initial set: 3 hrs 50min.
Final set: 5 hrs 10min.

Test method: CNS 3763(2009) and requirements: Initial set: not less than 1 hr, Final set: not more than 10 hrs.

 

Soundness

Test item Result
 Visual observation No shrink, expansion

crack or warp

CNS 3763(2009) & requirements: No shrink, expansion crack or warp

 

Compressive strength and ratio

Test item Result
Control group (Kgf/cm2) 448.6  

ratio

 

0.92

Test group (Kgf/cm2) 411.4

CNS 3763(2009) & requirements: ≧ 0.85.

 

Water absorption ratio

Test item Result
1 hour 0.20  

ratio

 

0.22

5 hours 0.20
24 hours 0.27

CNS 3763(2009) & requirements: ≦ 0.50.

 

Permeability ratio

Test item Result
Control group (g) 8.8  

ratio

 

0.32

Test group (g) 2.8

CNS 3763(2009) & requirements: ≦ 0.50.

 

Enhance the adhesives strength of ceramic tiles

Test item Result
Normal mortar 2

8.1 kgf/cm

Mortar with BLACK BEAR 2

11.8 kgf/cm

CNS 3763(2009) & requirements: ≧ 6kgf/cm2.

 

Cl ion in cementitious material

Test item Result
Mortar with BLACK BEAR 0.0024 %

Test method: CNS 14703(2002) & standard for green building material labe: ≦0.1%.

 

Water absorption rate

Test item Result
Normal mortar 6.9%
Mortar with BLACK BEAR 1.5%

Detector: Kett HI-520-2 Concrete and Mortar Moisture Tester

 

Water absorption

 

Water repellency effect

 

Waterproofing & Breathability

 

Important Notice:

BLACK BEAR believes the information on the data sheets is reliable and accurate as is technical advice provided by the company. SCTC makes no warranties (expressed or implied) regarding the accuracy of the information and assumes no liability regarding the handling and usage of this product. In every case we urge and recommend that purchasers before using any product in full-scale production make their own tests to determine to their own satisfaction whether the product is of acceptable quality and is suitable for their particular purpose under their own operating conditions. SCTC further disclaims any liability for consequential or incremental damages of any kind including lost profits. No agency or representative or employee of this company is authorized to change this provision.

 

BLACK BEAR Aditif Semen Tahan Air

Leave a Reply

Your email address will not be published. Required fields are marked *

Close My Cart
Close Wishlist
Close Recently Viewed
Close
Close
Categories